Why you can trust Tom’s Hardware
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Be quiet! has systematically established itself within the power supply market by prioritizing acoustic performance as a fundamental design criterion rather than an afterthought. While competitors chase specification sheet supremacy, the German brand has built its reputation on a straightforward philosophy: power supplies should deliver reliable performance while remaining as imperceptible as possible to the user’s ears. This approach resonates particularly strongly with users assembling media production workstations, home theater PCs, and gaming systems, where mechanical noise fundamentally detracts from the experience.
The Power Zone 2 1200W enters the high-wattage mainstream segment with this acoustic-first philosophy firmly intact, with Be quiet! engineering a unit balancing contemporary features with aggressive noise reduction. The result adheres to the Intel ATX 3.1 specification while achieving an 80Plus Platinum certification. Combined with dual native 12V-2×6 connectors featuring thoughtful 90-degree angles, the Power Zone 2 addresses modern high-end system requirements while maintaining characteristic acoustic refinement. At approximately $230 MSRP, however, this positioning creates competitive challenges against the best power supplies in its category, raising questions about whether Be quiet!’s acoustic expertise and thermal engineering can overcome specification sheet compromises.
Specifications and Design
|
RAIL |
+3.3V |
+5V |
+12V |
+5Vsb |
-12V |
|
MAX OUTPUT |
20A |
20A |
100A |
3A |
0.5A |
| Row 2 – Cell 0 |
120W |
120W |
1200W |
15W |
6W |
|
TOTAL |
1200W |
Row 3 – Cell 2 | Row 3 – Cell 3 | Row 3 – Cell 4 | Row 3 – Cell 5 |
|
AC INPUT |
100 – 240 VAC, 50 – 60 Hz |
Row 4 – Cell 2 | Row 4 – Cell 3 | Row 4 – Cell 4 | Row 4 – Cell 5 |
|
MSRP |
$230 |
Row 5 – Cell 2 | Row 5 – Cell 3 | Row 5 – Cell 4 | Row 5 – Cell 5 |
In the Box
The be quiet! Power Zone 2 1200W arrives in cardboard packaging employing be quiet!’s signature all-black aesthetic theme, with the front dominated by a high-resolution photograph of the unit itself. Inside, protective foam inserts and a nylon pouch ensure the unit survives the shipping gauntlet intact.
The accessory bundle approaches minimalism that does not elevate the unboxing experience beyond bare necessity. Beyond the mandatory mounting screws and AC power cable, be quiet! includes only some basic cable ties, but there are also two reusable cable straps that originally secure the included modular cables in organized bundles.
The Power Zone 2 implements full modularity, allowing builders to connect only necessary cables and minimize interior clutter that impedes airflow. Every cable features all-black construction with matching connectors and wires, all employing flat, ribbon-like profiles without exterior sleeving. This design choice creates a uniform appearance that integrates seamlessly into modern builds, emphasizing clean aesthetics while maintaining excellent flexibility. Notably, the unit includes two 12V-2×6 cables, each with a 90-degree connector on the GPU end – which is its only advantage over the 1000 watt version of itself.
|
Connector type |
Hardwired |
Modular |
|---|---|---|
|
ATX 24 Pin |
– |
1 |
|
EPS 4+4 Pin |
– |
1 |
|
EPS 8 Pin |
– |
1 |
|
PCI-E 5.0 |
– |
2 |
|
PCI-E 8 Pin |
– |
3 |
|
SATA |
– |
7 |
|
Molex |
– |
1 |
|
Floppy |
– |
– |
External Appearance
Be quiet! has invested considerable resources making the Power Zone 2 visually distinctive through subtle sophistication rather than aggressive styling. The chassis receives a textured black paint finish that stands apart from typical smooth alternatives, providing tactile interest without visual loudness. On the right side, a decorative company logo appears subtly embossed into the chassis – so imperceptibly integrated that it reads more as refined detail work than overt branding. The left side displays the typical electrical specifications and certifications sticker, providing essential information without disrupting the overall aesthetic, as this surface remains hidden in most build configurations.
Image 1 of 2
The unit measures 160mm in length, exceeding the ATX design guide’s standard 140mm specification by a notable margin. This extended depth allows for improved component spacing and superior thermal management, as well as comfortably accommodating the oversized 140mm fan that forms the cooling strategy’s foundation. Most modern ATX cases accommodate this dimension without issue, but builders working with compact form factor or vintage enclosures should verify clearance before purchasing. The extra 20mm can occasionally cause interference in cases with unusual internal layouts or aggressive component placement near the PSU bay.
Image 1 of 2
The front panel features only the standard AC cable receptacle and on/off switch, maintaining clean lines without superfluous embellishment. The rear side hosts the connectors for the modular cables. The top surface remains completely flat and devoid of decorations, allowing the unit to blend seamlessly into chassis interiors. The fan finger guard integrates directly into the chassis, featuring a distinctive rhombus pattern that provides both protection and visual interest.
Image 1 of 2
Internal Design
At the heart of the Power Zone 2’s acoustic philosophy sits a Pure Wings 3 140mm fan, designed entirely in-house by be quiet! themselves. The fan employs a rifle bearing engine, representing a middle-ground solution between basic sleeve bearings and premium fluid dynamic bearing (FDB) alternatives commonly found in flagship units. Rifle bearings advance traditional sleeve bearing technology through enhanced lubrication retention mechanisms, delivering meaningfully better longevity while maintaining characteristically low noise output. The maximum rotational speed of 2100 RPM is a little high but not unwarranted for a unit with this power output.
The OEM behind the Power Zone 2’s creation is HEC (Compucase), one of the industry’s most established manufacturers with decades of platform development experience dating back to 1979. This is a major difference between the 1200W unit and the lower wattage units of the series, which are made by FSP – essentially, they may look identical externally but they are completely different PSUs. HEC produces a substantial portion of mid- and high-tier power supplies available today under various brand labels, lending credibility to the final product despite their mixed reputation in enthusiast circles. This particular platform from HEC, we have seen it before used in several 1000-1200 watt models over the past few years, although most of them were carrying Gold-level certifications.
The input filtering stage implements a comprehensive configuration featuring four Y capacitors, three X capacitors, and one substantial filtering inductor. Two rectifying bridges share real estate on the unit’s primary heatsink, positioned immediately after the filtering components. This filtering arrangement greatly exceeds basic requirements and should effectively suppress EMI, protecting both upstream power infrastructure and downstream components from electrical noise.
The APFC circuitry components share a generously-proportioned heatsink with the primary inversion components along the unit’s edge. Active components consist of three NCEPower NCE65TF099F MOSFETs paired with a single diode. One exposed inductor and two Teapo capacitors (470 μF each) comprise the passive components.
The primary inversion stage employs two Great Power GP47S60 MOSFETs configured in half-bridge topology on their own dedicated heatsink positioned near the main transformer. Half-bridge topologies represent standard practice for mainstream high-wattage units, offering reliable performance and proven thermal characteristics without the complexity and cost of full-bridge alternatives. The heatsink appears sizable and should provide more than adequate thermal capacity for sustained high-load operation, suggesting HEC engineered meaningful thermal margins into the design.
The secondary side implementation places six synchronous rectification MOSFETs on the PCB’s underside, though their markings suffered damage during disassembly preventing positive identification. They must be quite good if they are efficient enough to place this unit in Platinum-level territory. The unit employs DC-to-DC conversion circuitry for the 3.3V and 5V minor rails, mounted on a vertical daughterboard that features a heatsink literally engulfing it.
The capacitor selection throughout the secondary side presents the Power Zone 2’s most controversial design decision and merits extended discussion. Teapo supplies all secondary side capacitors, and while all carry appropriate 105°C temperature ratings meeting basic specifications, Teapo does not command the reputation associated with premium power supply construction. Teapo represents a respectable Taiwanese manufacturer—certainly not as prestigious as Japanese manufacturers like Nippon Chemi-Con, Rubycon, or United Chemi-Con, but possessing an established reputation nonetheless. For a unit backed by a 10-year warranty and positioned at a $230 price point, this component selection demands faith in HEC’s engineering margins and be quiet!’s confidence in the platform’s reliability.
Cold Test Results
Cold Test Results (25°C Ambient)
For the testing of PSUs, we are using high precision electronic loads with a maximum power draw of 2700 Watts, a Rigol DS5042M 40 MHz oscilloscope, an Extech 380803 power analyzer, two high precision UNI-T UT-325 digital thermometers, an Extech HD600 SPL meter, a self-designed hotbox and various other bits and parts.
Image 1 of 5
Under controlled testing conditions, the be quiet! Power Zone 2 1200W delivers efficiency performance that comfortably satisfies its certification requirements while revealing some interesting characteristics. At 115 VAC input voltage, the unit achieves an average nominal load efficiency of 91.4%, while 230 VAC input meaningfully improves performance to 93.0%. The unit has an 80Plus Platinum certification for an input voltage of 115 VAC from CLEAResult but no Cybenetics certification at the time of this review. The efficiency curve exhibits typical behavior for LLC resonant topology implementations, peaking at approximately 50% load before gradually declining as output increases. Low-load efficiency proves adequate rather than exceptional.
The fan behavior during cold testing validates be quiet!’s acoustic-first design philosophy spectacularly. The Power Zone 2 1200W features a zero-RPM fan mode, with the Pure Wings 3 fan remaining completely silent at lower loads. The fan only begins spinning when load exceeds approximately 700 watts, delivering virtually silent operation for typical computing tasks. Even when the fan does engage, it remains exceptionally quiet – very quiet even when the unit operates at its full 1200W rated capacity. The acoustic signature remains minimal throughout the entire load range, creating an experience that essentially eliminates the power supply as a noise source during typical gaming, content creation, or productivity workloads. The thermal performance proves equally impressive, with internal temperatures remaining exceptionally low throughout testing.
Hot Test Results
Hot Test Results (~45°C Ambient)
Elevated ambient temperature testing reveals the Power Zone 2’s engineering margins with particular clarity. At approximately 45°C ambient – representing extreme environmental conditions that exceed typical case interior temperatures even in warm climates – high temperatures exert measurable detrimental effects on electrical performance. Average nominal load efficiency measures 90.2% at 115 VAC and 91.8% at 230 VAC under hot conditions, representing an efficiency drop of 1.2% compared to cold testing. There exist some signs of thermal stress at maximum load, as the efficiency drop measures slightly greater when the unit is very heavily loaded, but the effect remains modest and well within acceptable parameters for a Platinum-certified unit.
Image 1 of 5
In hot conditions, the fan behavior adjusts appropriately while maintaining exemplary acoustic performance. The fan starts spinning at a load of approximately 420 watts, noticeably earlier than in cold testing, but remains remarkably quiet throughout most of the load range. The unit maintains low noise levels until load approaches 950 watts, at which point the fan increases to full speed to manage the thermal load. Despite the more aggressive fan response at maximum load, internal temperatures remain exceptional throughout hot testing, with components operating well below their maximum rated temperatures even at sustained full load. This is crucial, especially considering that the unit managed to output its maximum power output under such conditions even though it is rated at up to 40°C. The thermal performance and acoustics are exemplary, demonstrating intelligent engineering that balances cooling effectiveness with noise control. For users in warm climates or systems with restricted airflow, this represents an intelligent engineering tradeoff.
PSU Quality and Bottom Line
Power Supply Quality
The be quiet! Power Zone 2 1200W’s electrical performance delivers results that align appropriately with its Platinum certification and mainstream positioning. Voltage ripple filtering proves good across all rails, with maximum measurements of 26 mV on the 12V rail and 16 mV on both the 5V and 3.3V rails. These figures comfortably satisfy ATX specifications, which permit up to 120 mV on the 12V rail and 50 mV on minor rails. While the Teapo capacitors are not top-tier, they assist greatly here, lending them a redeeming performance. Voltage regulation proves fair across all rails, meeting expectations for a modern DC-to-DC design. The 12V rail maintains 0.7% regulation, while the 5V and 3.3V rails achieve 1.2% regulation each. These results are competent but uninspiring by today’s standards.
During our thorough assessment, we evaluate the essential protection features of every power supply unit we review, including Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), and Short Circuit Protection (SCP). All protection mechanisms were activated and functioned correctly during testing.
The protection features function correctly. OCP on the primary 12V rail activates at 122%, a reasonable threshold that provides substantial headroom for transient spikes while protecting against sustained overcurrent conditions. The minor rail OCP settings prove notably higher, triggering at 152% on the 3.3V rail and 150% on the 5V rail. Over Power Protection (OPP) activates at 124% under hot conditions, allowing the unit to briefly handle loads approaching 1490 watts before shutting down protectively. All protection mechanisms activated sharply and correctly during testing, shutting down the unit cleanly without damage when triggered.
|
Load (Watts) |
242.87 W |
Header Cell – Column 2 |
606.12 W |
Header Cell – Column 4 |
904.33 W |
Header Cell – Column 6 |
1204.64 W |
Header Cell – Column 8 |
|---|---|---|---|---|---|---|---|---|
|
Load (Percent) |
20.24% |
Row 0 – Cell 2 |
50.51% |
Row 0 – Cell 4 |
75.36% |
Row 0 – Cell 6 |
100.39% |
Row 0 – Cell 8 |
| Row 1 – Cell 0 |
Amperes |
Volts |
Amperes |
Volts |
Amperes |
Volts |
Amperes |
Volts |
|
3.3 V |
1.87 |
3.4 |
4.68 |
3.4 |
7.01 |
3.36 |
9.35 |
3.35 |
|
5 V |
1.87 |
5.11 |
4.68 |
5.09 |
7.01 |
5.06 |
9.35 |
5.05 |
|
12 V |
18.71 |
12.13 |
46.77 |
12.11 |
70.15 |
12.05 |
93.53 |
12.04 |
|
Line |
Regulation (20% to 100% load) |
Voltage Ripple (mV) |
Header Cell – Column 3 | Header Cell – Column 4 | Header Cell – Column 5 | Header Cell – Column 6 | Header Cell – Column 7 |
|---|---|---|---|---|---|---|---|
| Row 0 – Cell 0 | Row 0 – Cell 1 |
20% Load |
50% Load |
75% Load |
100% Load |
CL1 12V |
CL2 3.3V + 5V |
|
3.3V |
1.2% |
16 |
12 |
14 |
16 |
12 |
14 |
|
5V |
1.2% |
14 |
12 |
16 |
16 |
12 |
16 |
|
12V |
0.7% |
20 |
14 |
22 |
26 |
26 |
20 |
Bottom Line
The be quiet! Power Zone 2 1200W represents a calculated bet on user priorities, wagering that real-world acoustic experience matters more than component specification sheets. This gamble largely pays off for the target audience. The zero-RPM fan mode with the Pure Wings 3 fan allows the unit to remain completely silent during light to moderate loads. During actual use (gaming sessions, content rendering, productivity workflows), the power supply effectively disappears from the system’s acoustic signature for most workloads. Even under sustained moderate loads approaching 700-800 watts, the fan either remains off or operates at barely perceptible speeds. The thermal engineering deserves particular recognition; internal component temperatures stay remarkably conservative throughout testing, suggesting the unit will age gracefully even in systems with marginal case ventilation.
The efficiency performance delivers exactly what the 80Plus Platinum certification promises without exceeding it. The peak efficiency figures represent solid engineering for a high-wattage mainstream unit. The dual 12V-2×6 connectors with 90-degree orientation demonstrate practical thinking about modern GPU power delivery, eliminating cable strain and improving aesthetics in window-side builds. The two 12V-2×6 connectors theoretically are the only advantage the 1200W unit offers over its own 1000W counterpart, as the Power Zone 2 1000W unit shares the same specifications but has only one 12V-2×6 connector (and a slightly lower power output, of course).
Where the Power Zone 2 stumbles is component selection. Teapo capacitors dominate the secondary side, representing an unambiguous cost-saving measure that places this unit firmly in budget-tier territory regarding internal quality. HEC has engineered sufficient margins to make the 10-year warranty credible, but users accustomed to Japanese capacitor selections will rightfully view this as a downgrade. The electrical measurements do not really support this qualitative assessment though – ripple suppression has been exceptional.
For system builders constructing high-wattage quiet workstations or gaming systems where PSU noise genuinely matters, the Power Zone 2 1200W makes compelling sense despite its compromises. The acoustic achievement is genuine and meaningful, not marketing hyperbole. Users in temperate climates with reasonable case ventilation will experience near-silent operation during typical computing tasks, with the fan only asserting itself during extended high-load scenarios that stress the entire 1200W capacity.
However, the $230 MSRP creates positioning challenges. At this price point, competitors offer premium components, tighter voltage regulation, and comparable or superior feature sets. The Power Zone 2 needs lower street pricing to represent compelling value against alternatives. Users who absolutely prioritize silence above all else may find the current pricing acceptable, but most builders would be better served waiting for inevitable sales or considering alternatives if premium component quality matters to their purchasing decision. The 10-year warranty provides some reassurance regarding longevity concerns, and be quiet!’s reputation suggests they stand behind their products. The Power Zone 2 1200W will not fail catastrophically or deliver inadequate power quality for modern systems. It simply represents a specific set of engineering choices: exceptional thermal management and acoustic performance financed through budget-tier component selection. Whether this trade-off aligns with individual priorities determines whether this unit represents an intelligent purchase or a missed opportunity.
MORE: Best Power Supplies
MORE: How We Test Power Supplies
MORE: All Power Supply Content
التعليقات