Why you can trust Tom’s Hardware
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Atari officially launched the Gamestation Go handheld retro gaming console a couple of months ago, and we were lucky enough to acquire one recently. This is quite a departure from the best PC gaming handhelds we usually test, but it still packs in buckets of fun for those with a taste for retro.
Fuelling the Gamestation Go’s potential success are several special features. Probably the most alluring features of this 7-inch handheld are its pleasing array of retro arcade–appropriate controls, and My Arcade’s inclusion of a whopping 200+ classic games from Atari, Jaleco, Namco, and others built-in.
Image 1 of 4
Design of the Atari Gamestation Go
The Atari Gamestation Go takes its cues from the most popular PC handheld designs right now. In other words, it looks a lot like a Steam Deck or ROG Ally – from a distance. Once you take a little more time to absorb what you are seeing, though, some interesting differences will catch your eye.
Scanning beyond the now familiar 7-inch landscape form factor, several things become obvious. To the right, there is a numeric keypad. That’s different. But to the right are some of the most important physical controller design ‘innovations’ – in our experience. From top to bottom, you will see an integrated paddle/dial/spinner; below that, there’s a more familiar D-pad, and below that a trackball. Control options like these can really impact the retro-gaming experience – and there are several famous Atari console and arcade games that used controls like paddles and trackballs to differentiate the gaming experience.
Unpacking and getting hands-on
Atari and My Arcade have produced some excellent packaging for this device. The box looks glossy, bright, and eye catching, highlighting the console design and its classic arcade contents. This positive impression grows when you flip up the faux-top to reveal a gatefold gaming content reveal. The games that My Arcade must expect to exert the strongest pull are shown in a grid on the upper half of the gatefold; below you will see the full 200+ games listed.
Inside the box, we see everything is very well padded for protection in transit. Moreover, the makers haven’t skimped on accessories. There’s an HDMI cable, USB-C charging cable, and power brick, all provided. A couple of bits of paperwork are also to be found in the box. One asks users to connect to Wi-Fi to keep the system up to date, and the other advertises the upcoming GamePad and Arcade Stick controller peripherals, made especially for Gamestation users. These will surely plug directly into the two USB-C ports on the back of the device.
In my hands, the Gamestation Go feels plastic but very solid. Twisting it, there is a little give, but nothing dramatic, and there was no easily induced creaking heard, or threat of panels buckling observed.
Image 1 of 4
Atari Gamestation Go Specifications
|
Screen |
7-inch IPS technology panel |
|
Gaming controls |
Paddle, D-pad, track-ball, ABXY buttons, 2×2 shoulder buttons, numeric keypad |
|
Non-gaming controls |
Settings, credit (coin), select, start, volume rocker, home, and power buttons |
|
Ports |
Wi-Fi, HDMI, USB-C x3, headphone jack, microSD card slot |
|
Battery |
7,200mAh 3.7W battery pack offers four to five hours gaming time per charge |
|
Size, weight |
269 x 133 x 26mm (add 10mm for paddle protrusion), 10.6 x 5.2 x 1-inches. 565g, 1.25 pounds |
|
Lighting |
SmartGlow control lighting system, battery charging and status LED |
|
Software |
Linux derivative OS, 200+ built-in games, compatibility with other games via microSD access |
|
Other |
Stereo speakers, built-in kickstand |
|
Unknowns |
Processor, RAM, storage |
Teardown attempt – not entirely successful
Atari and My Arcade don’t disclose the components used inside the Gamestation Go, so I was more than curious to open up this handheld up to take a look at the PCB.
First, the good news: Accessing the battery was a cinch. Two T6 screws needed to be removed from the back panel, and then the battery cover, sat between the legs of the integrated kickstand, could slide down and reveal the 7,200mAh 3.7W battery pack.
It was simple enough to unplug the battery, as the two adhesive strips fixing it in place just needed some gentle persuasion. This battery is attached to the PCB via a small 3-wire removable connector.
Now onto the bad news. I could find no more screws and couldn’t pry apart the console by levering any of its seams with my tools. Stumped, I went along to my local smart device repair emporium, and they thought the screen would need to be heated up, and the PCB would be uncovered by pulling this up and away, like one might open up a tablet. However, they couldn’t guarantee the device would still work after such an operation, so I decided not to sacrifice this handheld.
We have seen no other teardown online, but Atari enthusiasts buzzing around forums generally think that the innards of the new Gamestation Go are closely related to the non-portable Gamestation Pro, released two years prior. This non-portable TV-companion console was torn down here.
If the assumption that these consoles have a very similar set of inner components is correct, the new Gamestation Go will be Rockchip RK3032-powered. This is a very modest SoC, with dual Arm Cortex-A7 cores, supported by Mali-400MP graphics and up to 512MB of DDR3 RAM.
For software support, an RK3032 retro gaming device maker will usually look to Linux SpectralElec 3.0 and EmuELEC v9.0 builds. It will also struggle with any games newer than the 16-bit era, which tallies with my experience of this system (as we’ll discuss later).
Image 1 of 2
Gaming experience
From sliding the red switch to the on-position, to reaching the game UI of the Gamestation Go, takes an unwelcome full 30 seconds. Once there, you will be presented with a colorful interface where the D-Pad is used to scroll horizontally between ‘systems.’ After a system has been selected, there are usually subcategories to flick through vertically, followed by a cascading list of actual games.
It can take a while to get to a game you like, and (perhaps obviously) the Atari family contains a long list of consoles and platforms, each with rather long game lists inside. Thankfully, you can favorite/bookmark titles, and there is a recent list, too, but these shortcut lists aren’t global. Thus, you have favorite lists for Atari games, for PIKO, and Jaleco titles. Moreover, smaller main categories like Atari Recharged, Balls of Steel (pinball), and Pac-Man titles are offered up in a horizontally scrolling format, like the home screen.
As you scroll through the list of games in your chosen category, the console UI shows a picture of the cartridge or cabinet, plus an animation showing gameplay, and beneath that, there’s a more-info section.
In your chosen game, it is quick and easy to head to the settings menu to adjust brightness, screen aspect ratio, load and save states, and view (but not adjust) the controls available. Moreover, the Home button works quickly for getting straight back to the game selection UI and picking something else to enjoy.
Image 1 of 3
The games library
I was keen to dive into some of the classics I remember from the arcades of yesteryear. Some of these titles ate through quite a few coins in my time. Thus, it was exciting to see Asteroids, Berzerk, Breakout, Millipede, Missile Command, Space Duel, Breakout, and Tempest among the roster of titles.
Quite a few of my favorite old arcade titles are ‘vector’ style, and I enjoyed playing them. However, bear in mind that many arcade games get hard and frantic quite quickly. Remember, these titles were designed to hook people in and extract cash as quickly and efficiently as possible – not for lengthy gaming sessions.
Still on the topic of the arcade games on this machine, it was interesting to check each one, and the SmartGlow lighting choices for controls that had been pre-ordained by My Arcade.
For example, Asteroids used the D-pad for ship rotation and thrust, and one of the ABXY buttons for fire. I also enjoyed using the rotational paddle dial in Super Breakout and Tempest. Some fun trackball games that got me playing were Millipede and Missile Command.
It’s also important to note the Gamestation Go ahs many duplicate games. Sometimes I wondered why there were so many duplicates, especially in the Atari library. For example, there are versions of Centipede for the Atari 2600, 5200, 7800, and arcade. Then titles like Asteroids and Breakout also have modern Recharged Editions, as well as various old console and arcade versions.
Controllers don’t live up to their potential
While control method authenticity is something of a star attraction for Gamestation Go gamers, there are some clear issues with it, in my experience.
One of the first things you may notice when gaming on this handheld is that you can’t change the controller configuration. The pre-defined SmartGlow indicated controller configuration is what you have to live with. If a game is configured to use the D-pad for movement by Atari / My Arcade, then trying the paddle or trackball will be futile. There’s no way to change this in any of the firmwares I had during testing (v 1.0 and v1.1).
Not only did the SmartGlow highlighted pre-selected controller choices and adjustment possibilities disappoint, the physical interfaces aren’t the best. Specifically, I found the inertia of the paddle, dial, spinner (or whatever you prefer to call it) was too strong. So it was often cold-treacle slow to move in response to on-screen action. I didn’t enjoy the trackball either. I’d instead call it the track-marble, as it is so small. This control method is really overly sensitive, with no way to tone it down. The D-Pad, ABXY buttons, and shoulder buttons all felt good enough, though.
Games performance and compatibility
With the pre-installed games, I didn’t notice any poor performance or symptoms of the hardware not being up to the job. I’d say the most processor-intensive (newest) titles available in the pre-installed list all worked without a hitch, without slowdowns, glitching, or audio pops or crackling. Thus, this handheld, with its underlying hardware, is fit for purpose.
Image 1 of 2
Micro SD card fun
Though not documented by Atari or My Arcade on the official product pages, Gamestation Go users can expand their playable games library using the system’s microSD card slot. This feature is another one that is shared by the prior Gamestation Pro console.
To get an SD card to be recognized by the system, you must format it using exFAT. ROMs for particular systems need to use pre-set extensions. It also makes sense to keep ROMs for different systems in different sensibly named folders, for your hygiene and sanity.
To access these files, you must turn on the system with the SD card already inserted. Just before the UI settles down and is ready for user interaction, you then select between the ‘Local Storage’ or ‘Micro SD card’ options (see above gallery). It is easy to press the Home button and get back to the basic folders and files SD card list. If you press Home twice in a row, it will take you to the built-in games. From here, I didn’t find a way to get back to the SD card contents, except via a system restart.
I successfully tested and enjoyed some games from the Sega Genesis (AKA Mega Drive), Super Nintendo (SNES), Atari Lynx, and NeoGeo Pocket Color (NGPC) systems. All the titles I tried from these systems played nicely, albeit with just the D-Pad and ABXY buttons usable during play. Perhaps some SNES games pushed the system a little too far, as I heard a bit of audio crackling in some of these classic titles.
Image 1 of 4
Moving beyond the 16-bit era, I had no success with original PlayStation, Nintendo 64, or PlayStation Portable titles, whatsoever. While the latter two platforms may have been limited by the lack of analog joystick controls provided by the Gamestation Go, the PS1 should have been fine in this respect.
I could have tried more titles, and I’ve read of other testers having success with them, but I gave up when all my picks just black-screened and returned me to the UI. I’d only very limited hopes that the Rockchip CPU could have coped with the newer systems, anyway.
Bottom line
My Arcade and Atari have crafted a handheld retro gaming console graced by a bevy of unique retro-futuristic controls. It is clever to differentiate this device by having a paddle and trackball built-in, and this will surely exert a gravitational pull on retro gamers in its orbit. While the Gamestation Go largely works as intended, its appeal is dulled by the lack of user-configuration options, rendering quirks in classic vector games, and a price point that feels misaligned with its level of hardware and software polish. We remain hopeful that further firmware updates can improve matters, but canny customers don’t buy on a promise.
Another thorn in the Gamestation Go’s sides is that nearly everyone owns a smartphone, with a screen approaching the 7-inch diagonal of this handheld. Many more will have access to a portable in the form of a tablet, laptop, or handheld – often with even larger, more immersive, screens. Add a nice game controller to the powerful mobile device you already own, and you can probably enjoy playing emulated consoles from eras much more recent than the Gamestation Go can hope to support.
These flexible alternative platforms also have legitimate access to many of the same Atari games via Google Play, the Apple App store, and the various PC/Steam games libraries.
Providing yet more competition to the Atari Gamestation Go are consoles like the Nintendo Switch. Users of this popular hybrid console can load up carts / downloads like Atari Mania, and several Atari Recharged collections.
Last but not least, there are dozens of gaming handhelds on Amazon, AliExpress and other marketplaces that are designed primarily for playing retro console and arcade ROMs. These platforms may have fewer legitimately licensed game collection options, but that won’t bother some. While I haven’t seen any rivals with the trackball or paddle that the Atari offers, they often come with analog joysticks – and enough processing power to make later generations of console and arcade games playable. Moreover, there are lots of options around $50, if a 4-inch screen is enough for your retro gaming fix.
Among these alternatives, to be fair, is the My Arcade Atari Pocket Player Pro at just $39.99 on Amazon at 11% off right now. It has a small screen at just 2.75-inches, and relatively limited controls. However, it still has a decent 100+ licensed games built in and similar cool styling to the newer and more substantial Gamestation Go. That alternative Atari-branded product might just be enough for an enjoyable blast from the past. We’d also expect the larger new console to have some attractive price cuts in due course, rewarding those who are patient.
During my testing, the Gamestation Go’s firmware received an update from version 1.0 to 1.1. It was good to see some improvements, but I feel there’s still plenty more to do in future revisions.
If you’re still in for the nostalgia, you can grab the Atari Gamestation Go from Amazon.com for $179.99 today.
التعليقات